TD0101F MAKITA IMPACT DRIVER FEATURES Slim and durable aluminium hammer case Compact design for perfect handling Externally accessible carbon brush No harm to the wrist when a screw is seated Enables to drive screws even without pre-drilling pilot holes SPECIFICATION Continuous Rating Input: 230 W Capacity Machine Screw: M4 - M8 (5/32 - 5/16'') Standard Bolt: M5 - M14 (3/16 - 9/16'') High Tensile Bolt: M5 - M10 (3/16 - 3/8'') Coarse Thread (in length): 22 - 90 mm (7/8 - 3-1/2'') Driving Shank (Hex): 6.35 mm (1/4'') Impacts Per Minute (IPM): 0 - 3,200 Max Fastening Torque: 100 N·m (74 ft lbs) No Load Speed (RPM): 0 - 3,600 Dimensions (L x W x H): 184 x 67 x 192 mm (7-1/4'' x 2-5/8'' x 7-9/16'') Net Weight: 0.99 kg (2.2 lbs) Power Supply Cord: 2.5 m (8.2 ft) NOTE * Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application. WARRANTY Every Makita Product is thoroughly inspected and tested before leaving the factory. Subject to thefollowing terms and conditions, the Product (Tool, Battery, Charger) is warranty against defective materials and manufacturing defects for a period of twelve (12) months from the date of purchase (applicable for purchases made from 1st October 2017 onwards) as evidenced from the sale or tax invoice (with tool serial number) and Makita Authorised Service Centre or Makita Service Centre undertakes, at our option, to repair or replace, free of charge. Conditions of warranty This warranty will NOT cover or shall be null & void in any of the following events even during the warranty period:- 1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,) 2. Damage resulting from use of improper accessories, non genuine replacement parts, disassembly, tampering, alteration and repairing in any way that affects its performance. 3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse and misuse in evident caused by overloading the tool beyond its capacity. 4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual. 5. If the serial number on the tool, seal on the battery and charger has been defaced or removed. 6. If the receipt or invoice that display the date of purchase could not be present. read more

M3701B MAKITA 6MM (1/4'') TRIMMER  FEATURES 530 W motor delivers 35,000 RPM for smooth trimming and light routing applications Aluminum housing for higher durability Transparent base for a clear view of the trimming edge Top-mounted power cord stays out of the way for easier operation Compact with light weight SPECIFICATION Continuous Rating Input: 530 W Plunge Capacity: 0 - 42 mm (0 - 1-5/8'') Collet Capacity: 6 mm or 1/4'' No Load Speed (RPM): 35,000 Dimensions (L x W x H): 82 x 90 x 199 mm (3-1/4'' x 3-1/2'' x 7-7/8'') Net Weight: 1.6 kg (3.5 lbs) Power Supply Cord: 2.0 m (6.6 ft) STANDARD EQUIPMENT Trimmer Guide, Straight Guide Assembly, Templet Guide, Straight Bit (733238A9), Chip Deflector, Wrench NOTE * Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application. WARRANTY Every Makita Product is thoroughly inspected and tested before leaving the factory. Subject to thefollowing terms and conditions, the Product (Tool, Battery, Charger) is warranty against defective materials and manufacturing defects for a period of twelve (12) months from the date of purchase (applicable for purchases made from 1st October 2017 onwards) as evidenced from the sale or tax invoice (with tool serial number) and Makita Authorised Service Centre or Makita Service Centre undertakes, at our option, to repair or replace, free of charge. Conditions of warranty This warranty will NOT cover or shall be null & void in any of the following events even during the warranty period:- 1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,) 2. Damage resulting from use of improper accessories, non genuine replacement parts, disassembly, tampering, alteration and repairing in any way that affects its performance. 3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse and misuse in evident caused by overloading the tool beyond its capacity. 4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual. 5. If the serial number on the tool, seal on the battery and charger has been defaced or removed. 6. If the receipt or invoice that display the date of purchase could not be present. read more

M0910B MAKITA 100MM (4'') ANGLE GRINDER WITH TOGGLE SWITCH FEATURES Toggle Switch High performance and durability at less expense Designed for light duty applications Toggle switch for easy operation Powerful 540 W motor delivers 12,000 RPM for the most demanding applications Wheel cover protects operator from accidental scattering of broken wheel or workpiece with minimal wheel cover movement SPECIFICATION Continuous Rating Input: 540 W Wheel Diameter: 100 mm (4'') No Load Speed (RPM): 12,000 Dimensions (L x W x H): 251 x 118 x 93 mm (9-7/8 x 4-5/8 x 3-5/8'') Net Weight: 1.6 kg (3.5 lbs) Power Supply Cord: 2.0 m (6.6 ft) STANDARD EQUIPMENT Lock Nut Wrench NOTE * Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application. WARRANTY Every Makita Product is thoroughly inspected and tested before leaving the factory. Subject to thefollowing terms and conditions, the Product (Tool, Battery, Charger) is warranty against defective materials and manufacturing defects for a period of twelve (12) months from the date of purchase (applicable for purchases made from 1st October 2017 onwards) as evidenced from the sale or tax invoice (with tool serial number) and Makita Authorised Service Centre or Makita Service Centre undertakes, at our option, to repair or replace, free of charge. Conditions of warranty This warranty will NOT cover or shall be null & void in any of the following events even during the warranty period:- 1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,) 2. Damage resulting from use of improper accessories, non genuine replacement parts, disassembly, tampering, alteration and repairing in any way that affects its performance. 3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse and misuse in evident caused by overloading the tool beyond its capacity. 4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual. 5. If the serial number on the tool, seal on the battery and charger has been defaced or removed. 6. If the receipt or invoice that display the date of purchase could not be present. read more

DTW300RTJ / Z MAKITA 12.7MM (1/2'') 18V CORDLESS IMPACT WRENCH Available Options RTJ: 1x Rapid Charger, 2x 5.0Ah Battery, 1x Makpac Connector Box Type 2 Z: Without Charger, Battery & Carrying Case FEATURES 3 modes of reaction time for automatic stop available both in forward and reverse rotation modes Trigger switch with full speed mode allows for less hand and finger fatigue Compact design with a short overall length of 144 mm (5-5/8'') Socket can be fixed with C-ring (ring spring) BL motor delivers 330 N·m (240 ft.lbs.) of max torque Variable 4-speed provides fastening control for a wide range of applications Twin LED lights with preglow and afterglow functions for better illumination SPECIFICATION Fastening Capacities Standard Bolt: M10 - M20 (3/8 - 3/4'') High Strength Bolt: M10 - M16 (3/8, 5/8'') Square Drive: 12.7 mm (1/2'') Nut-Busting Torque: 580 N·m (430 ft lbs) Impacts Per Minute (IPM): 0 - 4,000 | 0 - 3,400 | 0 - 2,600 | 0 - 1,800 Max Fastening Torque: 330 N·m (240 ft lbs) No Load Speed (RPM): 0-3,200 | 0-2,600 | 0-1,800 | 0-1,000 Dimensions (L x W x H): 144 x 81 x 246 mm (5-5/8 x 3-3/16 x 9-11/16'') Net Weight: 1.5 - 1.8 kg (3.4 - 4.1 lbs) STANDARD EQUIPMENT Belt Clip, Tool Catcher with Shoulder Belt (197941-0) NOTE * Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application. WARRANTY Every Makita Product is thoroughly inspected and tested before leaving the factory. Subject to thefollowing terms and conditions, the Product (Tool, Battery, Charger) is warranty against defective materials and manufacturing defects for a period of twelve (12) months from the date of purchase (applicable for purchases made from 1st October 2017 onwards) as evidenced from the sale or tax invoice (with tool serial number) and Makita Authorised Service Centre or Makita Service Centre undertakes, at our option, to repair or replace, free of charge. Conditions of warranty This warranty will NOT cover or shall be null & void in any of the following events even during the warranty period:- 1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,) 2. Damage resulting from use of improper accessories, non genuine replacement parts, disassembly, tampering, alteration and repairing in any way that affects its performance. 3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse and misuse in evident caused by overloading the tool beyond its capacity. 4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual. 5. If the serial number on the tool, seal on the battery and charger has been defaced or removed. 6. If the receipt or invoice that display the date of purchase could not be present. read more

UB100DZ MAKITA 12VMAX CORDLESS BLOWER FEATURES Max 2.6 m³/min air volume enough to satisfy user needs Compact and lightweight 12Vmax CXT Li-Ion battery for increased maneuverability Optional brush nozzle specially designed to brush and blow away dust and fine debris, enabling easy sash cleaning or removal of dust or pollen from cloths Optional wiper nozzle specially designed for removing water drops from, for example, a just washed car Larger air volume has been obtained by increasing the air outlet diameter Variable 3-speed for optimum speed control Supplied with a standard nozzle for general blowing applications SPECIFICATION Max Air Volume: 2.6 m³/min Max Air Velocity: 75 m/s Avg. Air Velocity: 62 m/s No Load Speed (RPM): 0 - 15,800 Max Sealed Suction: 4.0 kPa Dimensions (L x W x H): 505 x 155 x 184mm (19-7/8 x 6-1/8 x 7-1/4'') Net Weight: 1.4 - 1.9 kg (3.1 - 4.2 lbs) Continuous Use (min): High: 8 | Mid: 20 | Low: 45 With BL1016 STANDARD EQUIPMENT Nozzle Assembly (123245-4) NOTE * Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application. WARRANTY Every Makita Product is thoroughly inspected and tested before leaving the factory. Subject to thefollowing terms and conditions, the Product (Tool, Battery, Charger) is warranty against defective materials and manufacturing defects for a period of twelve (12) months from the date of purchase (applicable for purchases made from 1st October 2017 onwards) as evidenced from the sale or tax invoice (with tool serial number) and Makita Authorised Service Centre or Makita Service Centre undertakes, at our option, to repair or replace, free of charge. Conditions of warranty This warranty will NOT cover or shall be null & void in any of the following events even during the warranty period:- 1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,) 2. Damage resulting from use of improper accessories, non genuine replacement parts, disassembly, tampering, alteration and repairing in any way that affects its performance. 3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse and misuse in evident caused by overloading the tool beyond its capacity. 4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual. 5. If the serial number on the tool, seal on the battery and charger has been defaced or removed. 6. If the receipt or invoice that display the date of purchase could not be present. read more

HR2670X5 MAKITA 26MM (1'') COMBINATION HAMMER FEATURES 26 mm (1'') 3.0 J Combination Hammer, SDS-PLUS. Increased power and durability have been achieved by redesigning the internal structure while enhancing cost competitiveness by modifying the motor specifications from model HR2470. Equipped with three operation modes (Rotation only / Hammering only / Rotation + hammering). Powerful 800 W motor delivers 3.0 J of impact energy to handle the most demanding applications. Compatible with SDS-PLUS shank. SPECIFICATION Continuous Rating Input: 800 W Impact Energy: 3.0 J Capacity Concrete: 26 mm (1'') Core Bit : 68 mm (2-11/16'') Diamond Core Bit : 80 mm (3-1/8'') Steel: 13 mm (1/2'') Wood: 32 mm (1-1/4'') Impacts Per Minute (IPM): 0 - 4,500 No Load Speed (RPM): 0 - 1,500 Dimensions (L x W x H): 362 x 77 x 207 mm (14-1/4 x 3 x 8-1/8'') Net Weight: 2.9 - 3.4 kg (6.4 - 7.5 lbs) Power Supply Cord: 4.0 m (13.1 ft) STANDARD EQUIPMENT Side Handle, Depth Gauge, Drill Chuck (194041-7), SDS-Plus Bit Set (D-17784), Bull Point (D-08713) NOTE * Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application. WARRANTY Every Makita Product is thoroughly inspected and tested before leaving the factory. Subject to thefollowing terms and conditions, the Product (Tool, Battery, Charger) is warranty against defective materials and manufacturing defects for a period of twelve (12) months from the date of purchase (applicable for purchases made from 1st October 2017 onwards) as evidenced from the sale or tax invoice (with tool serial number) and Makita Authorised Service Centre or Makita Service Centre undertakes, at our option, to repair or replace, free of charge. Conditions of warranty This warranty will NOT cover or shall be null & void in any of the following events even during the warranty period:- 1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,) 2. Damage resulting from use of improper accessories, non genuine replacement parts, disassembly, tampering, alteration and repairing in any way that affects its performance. 3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse and misuse in evident caused by overloading the tool beyond its capacity. 4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual. 5. If the serial number on the tool, seal on the battery and charger has been defaced or removed. 6. If the receipt or invoice that display the date of purchase could not be present. read more

GA4031 MAKITA 100MM (4'') ANGLE GRINDER FEATURES Easy-to-operate toggle switch Powerful 720 W motor with excellent heat resistance Field coated with powder varnish to protect from dust Lightweight for reduced operator fatigue Toggle switch for easy operation SPECIFICATION Continuous Rating Input: 720 W Wheel Diameter: 100 mm (4'') No Load Speed (RPM): 11,000 Dimensions (L x W x H): 259 x 118 x 104 mm (10-1/4 x 4-5/8 x 4-1/8'') Net Weight: 1.71 - 2.00 kg (3.77 - 4.41 lbs) Power Supply Cord: 2.5 m (8.2 ft) STANDARD EQUIPMENT Depressed Center Wheel (A-80852), Wheel Cover, Lock Nut Wrench NOTE * Items of standard equipment and specifications may vary by country or area. Net weight and dimensions may differ depending on the type of battery(ies) used. All pictures shown are for illustration purpose only. Continuous Usage Time/ Work Amount: Actual performance may vary based on application. WARRANTY Every Makita Product is thoroughly inspected and tested before leaving the factory. Subject to thefollowing terms and conditions, the Product (Tool, Battery, Charger) is warranty against defective materials and manufacturing defects for a period of twelve (12) months from the date of purchase (applicable for purchases made from 1st October 2017 onwards) as evidenced from the sale or tax invoice (with tool serial number) and Makita Authorised Service Centre or Makita Service Centre undertakes, at our option, to repair or replace, free of charge. Conditions of warranty This warranty will NOT cover or shall be null & void in any of the following events even during the warranty period:- 1. Damage resulting from normal wear and tear (Carbon brush/ holder/ cap, switch, gear, grinding/ cutting wheels, bits, saw blades, etc.,) 2. Damage resulting from use of improper accessories, non genuine replacement parts, disassembly, tampering, alteration and repairing in any way that affects its performance. 3. Damage resulting from negligence, accident, disaster, improper storage or maintenance, abuse and misuse in evident caused by overloading the tool beyond its capacity. 4. Abnormal voltage or the usage of generator, wrong usage not in accordance with the Operating Manual. 5. If the serial number on the tool, seal on the battery and charger has been defaced or removed. 6. If the receipt or invoice that display the date of purchase could not be present.   read more